SETUP
3-2 powermax1650 Operator Manual
2
Upon receipt
1. Check that all items on your order have been received. Contact your distributor if any items are
missing or damaged.
2. If there is evidence of damage, refer to Claims, below. All communications regarding this
equipment must include the model number and serial number located on the back of the power
supply.
3. Read the Safety section of this manual before setting up and operating this Hypertherm system.
Claims
Claims for damage during shipment: If your unit was damaged during shipment, you must file a
claim with the carrier. Hypertherm will furnish you with a copy of the bill of lading upon request. If
you need additional assistance, call the nearest Hypertherm office listed in the front of this manual.
Claims for defective or missing merchandise: If any component is missing or defective, contact
your Hypertherm distributor. If you need additional assistance, call the nearest Hypertherm office
listed in the front of this manual.
Contents of the box
Check the items against the illustration.
To Next Page
Loading...
Need help?
General
