5-2
The Occupational Safety and Health Act (OSHA) required that truck users examine their trucks
before each shifts to be sure they are in safe working order. Defects when found shall be
immediately reported and corrected. The truck shall be taken out of service until it has been
restored to safe operating condition.
1)
A thorough walk-around check should be made BEFORE starting engine. This is required for your
personal safety and to realize maximum service life for your truck.
The numbers on the inspection chart show the order of inspection
These numbers correspond to the check item numbers given on the next pages.
Hang a caution sign on the truck(for example, Do not start or maintenance in progress).
This will prevent anyone from starting or moving the truck by mistake.
2)
1 Oil leakage
2 Tire air pressure
3 Coolant level
4 Engine oil level
5 Fan belt tension
6 Battery
7 Brake cooling oil level
8 Hydraulic oil level
9 Prefilter
10 Multi function switch
11 Pedals
12 Axle oil level
13 DEF level
Η
Θ
Ι
110D9OM51
2. CHECK BEFORE OPERATION
To Next Page
Loading...
Need help?
General
