3-2
1
4
3
1
4
3
6
2
5
6
2
5
NAME PLATE
Truck model number or registered name
Truck type
The type is indicated a type of the truck such as diesel, LPG or battery.
Truck serial number
An identification number assigned to this particular truck and should be used when requesting
information or ordering service parts for this truck from your authorized HYUNDAI dealer. The
serial number is also stamped on the frame.
Attachment description (If any installed)
The user must see that the truck is marked to identify the attachment (s), including the weight of
the truck/attachment combination and truck capacity with the attachment.
Capacity rating, load center, and lifting height data
Shows the maximum load capacity of this truck with relation to load centers and fork heights (See
diagram on plate). Personal injury and damage to the truck can occur if these capacities are
exceeded.
Do not exceed the maximum capacity specified.
Truck weight
The approximate weight of the truck without a load on the forks. This weight plus the weight of
the load must be considered when operating on elevators, elevated floors, etc. to be sure they are
safe.
Before modifications that affect the stability of safety systems are made written approval
from HYUNDAI. This is an OSHA requirement. Contact your authorized HYUNDAI dealer
for a new nameplate showing the revised capacity.
1)
(1)
(2)
(3)
(4)
(5)
(6)
92FT-00425
2. NAME PLATE AND SAFETY WARNING DECAL
To Next Page
Loading...
Need help?
General
