7-62
14. FUEL AND LUBRICANTS
Service point Kind of fluid
Capacity˶ (U.S.
gal
) Ambient temperatureĦC(ĦF)
110D-9
130D-9
160D-9
Engine oil
pan
Engine oil
14.2
(3.8)
DEF/
AdBlue®
tank
Mixture of urea
and deionized
water
37.8
(10.0)
Torque
converter
transmission
Engine oil
16
(4.2)
Drive axle
Gear
oil
STD
19
(5.0)
OPT 1
22.4
(5.9)
OPT 2
16.7
(4.4)
Brake Cooling oil
22
(5.8)
Hydraulic
tank
Hydraulic
oil
115
(30.4)
124.3
(32.8)
Cabin tilt
hand pump
Hydraulic
oil
0.7
(0.2)
Fuel tank
Diesel fuel
侏1
195
(51.5)
260
(68.7)
Fitting
(Grease nipple)
Grease - -
Radiator
Antifreeze:Water
50:50
30
(7.9)
SAE 30
SAE 10W
SAE 10W-30
SAE 10W-30
SAE 80W-90/API GL-5
DONAX TD
SAE 15W-40
SAE 15W-40
侏
ISO VG 15
ISO VG 46
ISO VG 68
侏
ASTM D975 NO.1
ASTM D975 NO.2
侏
NLGI NO.1
NLGI NO.2
Ethylene glycol base permanent type
-50 -30 -20 -10 0 10 20 30 40
(-58) (-22) (-4) (14) (32) (50) (68) (86) (104)
侏1
#= Ultra low sulfur diesel
- sulfur content ≤ 15
ppm
#侏
#=#Cold region
Russia, CIS, Mongolia
侏
Ethylene glycol base permanent type (60 : 40)
侏
SAE 5W-40
SAE numbers given to engine oil should be selected according to ambient temperature.
For engine oil used in engine oil pan, use SAE 10W oil when the temperature at the time of
engine start up is below 0 ˚
C
, even if the ambient temperature in daytime is expected to rise
to 10 ˚C or more.
Use engine oil of API service class CJ-4.
Η
Θ
Ι
NOTES :
ISO 22241 (High-purity urea + deionized water (32.5:67.5))
To Next Page
Loading...
Need help?
General
