WHAT TO DO IN AN EMERGENCY
3-4
D060A01A-AAT
CHANGING A FLAT TIRE
SSA3070A
The procedure described on the following pages
can be used to rotate tires as well as to change
a flat tire. When preparing to change a flat tire,
check to be sure the gear selector lever is in "P"
(automatic) or reverse gear (manual transaxle)
and that the parking brake is set, then:
Remove the spare tire and take out the jack,
jack handle, and tool bag from the trunk.
NOTE:
The jack handle is located beneath the lug-
gage mat in the vehicle trunk.
D060B01A-AAT
1. Obtain Spare Tire and Tool
D040B01Y
D060C01A-AAT
2. Block the Wheel
SSA3050D
Flat tire
Block the wheel that is diagonally opposite from
the flat to keep the vehicle from rolling when the
car is raised on the jack.
D060D01A-AAT
3. Loosen Wheel Nuts
SSA3070E
To Next Page
Loading...
Need help?
General
