FEATURES OF YOUR HYUNDAI
1- 31
B340C01A-AAT
Headlight Switch
B340C01Y
To operate the headlights, turn the barrel on the
end of the multi-function switch. The first posi-
tion turns on the parking lights, sidelights, tail
lights and instrument panel lights. The second
position turns on the headlights.
B340D01A-AAT
High-beam Switch
To turn on the headlight high beams, push the
lever forward (away from you). The High Beam
Indicator Light will come on at the same time.
For low beams, pull the lever back toward you.
B340E01A-AAT
Headlight Flasher
B340E01Y
To flash the headlights, pull the switch lever
toward you, then release it. The headlights can
be flashed even though the headlight switch is
in the "OFF" position.
B360B01Y
B360B01Y-GAT
Front Fog Light Switch (If installed)
To turn on the front fog lights, place the switch
in the "ON" position. They will come on when
the headlight switch is in the first or second
position.
B350A01A-AAT
WINDSHIELD WIPER AND WASHER
SWITCH
B350A01Y
1
2
3
The windshield wiper switch has three posi-
tions:
1. Intermittent wiper operation
2. Low-speed operation
3. High-speed operation
NOTE:
To prevent damage to the wiper system, do
not attempt to wipe away heavy accumula-
tions of snow or ice. Accumulated snow and
ice should be removed manually. If there is
only a light layer of snow or ice, operate the
To indicate a lane change, move the lever up or
down to a point where it begins flashing.
The lever will automatically return to the center
position when released.
To Next Page
Loading...
Need help?
General
