Driver Assistance System
7-2
OTM070111
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive at
speeds above 30 km/h (20 mph) without
depressing the accelerator pedal.
NOTICE
During cruise-speed driving of a
manual transmission vehicle, do not
shift into neutral without depressing
the clutch pedal, as the engine will be
overrevved. If this happens, depress
the clutch pedal or press the Driving
Assist button.
Cruise Control operation
To set speed
OAI3060018
1. Press the Driving Assist button on the
steering wheel to turn the function on.
The CRUISE indicator on the cluster
will illuminate.
2. Accelerate to the desired speed, which
must be more than 30 km/h (20 mph).
Information
For manual transmission vehicles, you
should depress the brake pedal at least
once to set the cruise control after starting
the engine.
OAI3069011
3. Push the SET- switch down, and
release it. The Set indicator on the
cluster display will illuminate.
4. Release the accelerator pedal.
&58,6(&21752/ǣ&&Ǥǣ,)(48,33('Ǥ
To Next Page
Loading...
Need help?
General
