9-55
09
NOTICE
• When replacing a blown fuse or relay
with a new one, make sure the new
fuse or relay fits tightly into the clips.
The incomplete fastening fuse or
relay may cause the vehicle wiring
and electric systems damage and a
possible fire.
• Do not remove fuses, relays and
terminals fastened with bolts or nuts.
The fuses, relays and terminals may
be fastened incompletely, and it may
cause a possible fire. If fuses, relays
and terminals fastened with bolts or
nuts are blown, consult an authorized
HYUNDAI dealer.
• Do not input any other objects
except fuses or relays into fuse/relay
terminals such as a driver or wiring. It
may cause contact failure and system
malfunction.
• Check the blown fuse with checking
the fuse information on the fuse box
cover.
• Replace the blown fuse on the safe
place after turning off the ignition
switch and all electric switches and
disconnecting the negative battery
cable.
Instrument panel fuse
replacement
OAI3089011
1. Turn the vehicle off.
2. Turn all other switches OFF.
3. Open the fuse panel cover.
4. Refer to the label on the inside of
the fuse panel cover to locate the
suspected fuse location.
To Next Page
Loading...
Need help?
General
