07
7-7
Rear view while driving
(if equipped)
OAI3059050
The driver is able to check the rear view
on the screen while driving, it is to assist
with safe driving.
Operating conditions
• The ignition switch is turned ON.
• The rear view monitor button (1) is
pressed when gear shift status is D
(Drive) or N (Neutral).
Off conditions
The rear view monitor button (1) is
pressed again.
When operating
• When the vehicle is reversing, the
screen switches to the parking
guidance screen.
• When Rear view while driving is
displayed on the screen, an icon (
)
will appear on the upper right side
of the screen indicating that the rear
view is being displayed.
Rear View Monitor malfunction
and limitations
Rear View Monitor malfunction
When Rear View Monitor is not working
properly, or the screen flickers, or
the camera image does not display
normally, we recommend that the
function beinspected by an authorized
HYUNDAIdealer.
Limitations of the Rear View
Monitor
When the vehicle is stopped for a long
time in winter or when the vehicle is
parked in an indoor parking lot, the
exhaust fumes may temporarily blur the
image.
WARNING
• The rear view camera does not cover
the complete area behind the vehicle.
The driver should always check the
rear area directly through the inside
and outside rearview mirror before
parking or backing up.
• The image shown on the screen may
differ from the actual distance of the
object. Make sure to directly check
the vehicle's surroundings for safety.
• Always keep the rear view camera
lens clean. If the lens is covered with
foreign material, it may adversely
affect camera performance and
Rear View Monitor may not operate
normally. However, do not use
chemical solvents such as strong
detergents containing high alkaline
or volatile organic solvents (gasoline,
acetone etc.). This may damage the
camera lens.
To Next Page
Loading...
Need help?
General
