36
Notes
About
SAVE
• If KEYx, KEYS, or SOURCE
is
not
entered
in
the SAVE command, data
in
the
work area will be stored for either a BASIC program
or
a DATA file, depending
on
the
definition
of
the
work area.
• If you interrupt execution
of
a SAVE command by pressing
the
ATTN key, the
operation
is
terminated. If
the
interruption occurs before the file has been
changed,
the
file remains unchanged. If
the
interruption occurs after
the
file
has been changed,
the
file
is
reinitialized
to
unused status.
• IMFs are
not
stored with
the
SAVE command. You
must
apply IMFs with the
PATCH command before you load the work area with any saved program
requiring IMFs.
Example
A sample SAVE command
is
as shown:
SAVE 4, KEY8
In
this example,
the
contents
of
function key 8 are saved
in
file 4, which resides
on
the
cartridge
in
the
built-in
tape
unit.
\.
j
To Next Page
Loading...
Need help?
General