Carriage Drive Assembly Removal
1.
Position Printer Power switch to
OFF;
unplug printer power
cord from wall outlet and disconnect Parallel Printer Cable.
2.
Remove forms.
3.
Remove forms rack (See page 3-56).
4. Remove access cover (See page 3-32).
5. Remove ribbon cartridge.
6. Remove top cover (See page 3-88).
7.
Move carriage to right side of frame.
8. Loosen nuts
mon carriage shaft
II
and pivot left end
of
shaft to front.
9. Remove screw
a and clamp
OJ
from left margin sensor.
10. Remove carriage drive assembly retaining screw
II.
11. Pivot carriage drive assembly clockwise, lift belt off drive
pulley, lift left margin sensor off post, and lift carriage drive
assembly from machine.
---II
~---
Drive Assembly
Left Margin
Sensor
~
3-42
To Next Page
Loading...
Need help?
General
