Left Margin Sensor Adjustment
1.
Position Printer Power switch to
OFF;
unplug printer power
cord from wall outlet and disconnect Parallel Printer Cable.
2.
Remove forms.
3.
Remove forms rack (See page 3-56).
4. Remove access cover (See page 3-32).
5. Remove top cover (See page 3-88).
6.
Remove ribbon cartridge.
7.
Insert a sheet
of
paper into the printer. Position paper to the
left frame.
8. Measure 1-3/4 inches from the left frame and mark the
position on the paper.
Left
Frame--'"
3-66
To Next Page
Loading...
Need help?
General
