Related concepts
Service and support
Expansion units
Accessing the control panel functions
Related tasks
Serial uninterruptible power supply conversion cable
Place the rack-mounted system or expansion unit in the service position
Related reference
PCI-X Cryptographic Coprocessor
Cables and adapters
Back views of a model 9405-520, 9406-520, 9406-525, or 9407-515
Related information
Support for IBM System i
Powerware
Cabling your model 9406-520 with a console or interface
Select which console or interface you want to connect your server to.
For a graphical representation of the slots and connectors, see the back views of the model.
Related reference
Back views of a model 9405-520, 9406-520, 9406-525, or 9407-515
Cabling a model 9406-520, 9406-525, or 9407-515 to access the
Advanced System Management Interface (ASMI)
Learn how to access the ASMI, connect external cables and power cords, cable the expansion units, attach
devices, route the cables, and start your server after you install all of your hardware features or replace
parts.
Tip: These instructions also apply to users who will use the Virtual Partition Manager.
To cable your server:
Before you begin
__ If you have hardware features that are not installed, install them now. For instructions, see Installing features
and replacing parts.
Accessing the Advanced System Management Interface (ASMI)
__ If you plan to connect a PC (with a browser) to the server to access the ASMI, see Accessing the ASMI using a
Web browser for instructions.
__ If you plan to use the ASCII terminal to access the ASMI, see Accessing the ASMI using an ASCII terminal for
instructions.
Cabling your server 15
To Next Page
Loading...
Need help?
General