2
Introduction
This chapter gives a general overview of the Aptiva Machine Type 2158/2163/
2164, describes the standard and optional features, and details functional and
environmental specifications.
Product Overview
Machine Types 2158, 2163 and 2164 have two PCI slots and one PCI/ISA
shared slot. The 2158 system supports the AMD K6 processor family while the
2163 supports the Pentium II and Celeron processors. On the other hand the
2164 system supports the Pentium II and Pentium III processors.
All the machine types support Accelerated Graphics Port (AGP), which allows
all installed system memory to be used as texture memory, yielding a huge
texture footprint to enhance 3D graphical display performance.
Listed below are 2158, 2163 and 2164 system features:
Processors (Machine Type 2158)
•
Socket-7 Zero Insertion Force (ZIF) connector.
•
Detachable CPU heat sink with fan.
•
One of the following processors can be installed:
- AMD K6-2/333 processor; 95MHz external, 333 MHz internal, with
3DNow!
™
technology
- AMD K6-2/350 processor; 100MHz external, 350 MHz internal, with
3DNow!
™
technology
Processors (Machine Type 2163)
Pentium II
•
Processor with the capabilities of MMX
™
technology
•
Processor in Single Edge Contact Cartridge (S.E.C.C.) packaging
technology (slot 1).
•
Dual Independent Bus architecture separates dedicated external system
bus and dedicated internal high-speed cache bus.
•
One of the following processors can be installed:
- Intel Pentium II -350 MHz internal, 100 MHz external
- Intel Pentium II -400 MHz internal, 100 MHz external
- Intel Pentium II -450 MHz internal, 100 MHz external
To Next Page
Loading...
Need help?
General