Note: For part numbers, refer to Models 870 and 890 processor towers in the Power and signal cables
page.
Index
Units per
assembly Description
PWR21 1 BPC-A J03 to Bulk Power Fan BPF-A, Cable attached to FAN
PWR22 1 BPC-B J03 to Bulk Power Fan BPF-B, Cable attached to FAN
PWR11 1 BPC-A J08 to DCA-1 J00, Red with white stripe
PWR12 1 BPC-B J08 to DCA-1 J01, Red
PWR13 1 BPC-A J09 to DCA-2 J00, Red with white stripe
PWR14 1 BPC-B J09 to DCA-2 J01, Red
PWR15 1 BPC-A J10 to DCA-3 J00, Red with white stripe
PWR16 1 BPC-B J10 to DCA-3 J01, Red
PWR17 1 BPD1-A J09 to DCA-4 J00, Red with white stripe
PWR18 1 BPD1-B J09 to DCA-4 J01, Red
PWR19 1 BPD1-A J10 to DCA-5 J00, Red with white stripe
PWR20 1 BPD1-B J10 to DCA-5 J01, Red
PWR05 1 BPC-A J04 to MDA-F1 J1, Red with white stripe
PWR06 1 BPC-B J04 to MDA-F1 J2, Red
PWR07 1 BPC-A J05 to MDA-F2 J1, Red with white stripe
PWR08 1 BPC-B J05 to MDA-F2 J2, Red
PWR01 BPC-A J06 to MDA-F3 J1, Red with white stripe
PWR02 1 BPC-B J06 to MDA-F3 J2, Red
PWR03 1 BPC-A J07 to MDA-F4 J1, Red with white stripe
PWR04 1 BPC-B J07 to MDA-F4 J2, Red
PWR09 1 BPC-A J02 to UEPO J00, Red with white stripe
PWR10 1 BPC-B J02 to UEPO J01, Red
PWR23 1 BPC-A/B P00 and M41 VPD to CB1 (FC 9094) VSCOMM
Table 2. AC line cords — Description and units per assembly
Note: For part numbers, refer to the
CCIN
For use by authorized service providers.
Follow the instructions for the model you are working on.
v Models 270, 820, 830, 840, SB2, and SB3 (See page 303)
v
Models 800, 810, 825, 870, and 890 (See page )
Instructions for Model 270, 820, 830, 840, SB2, and SB3
There are two parts here:
v “Locations for processors and memory FRUs” on page 304
v “Processor configuration” on page 305
Analyze hardware problems 303
To Next Page
Loading...
Need help?
General