CD-ROM installation steps
Models 742, 782, 723, 743, and 783 only
During installation, the Windows install screen prompts you to Press F6 if you
need to install any 3rd party SCSI or RAID Driver. Follow these steps to
continue:
1. Press F6.
2. Press S to obtain the driver from the RAID Driver diskette.
3. Insert the RAID Driver diskette in the floppy drive and press Enter.
4. Select the Intel(R) 82801FR SATA RAID Controller (Desktop ICH6R) option.
5. Press Enter to allow the installation to continue.
All models
1. Go to c:\wininst on the hard disk.
2. Type winnt. This will launch Windows 2000 Professional Workstation setup.
3. After the file copying portion of setup completes, remove the network boot disk
floppy from the floppy drive and press Enter.
4. The system will reboot in to the second portion of Windows 2000 Professional
setup. The “Welcome to Setup” screen will appear. Press Enter to continue
installing Windows 2000 Professional.
5. The license agreement will appear. Read the agreement by paging down. If
you agree to follow the license agreement, press F8 to continue.
6. A menu will appear which allows the install partition to be chosen. Only one
partition will appear. Press Enter to continue.
7. If conversion to NTFS is desired, you can perform the conversion on the next
screen. If the current file system is sufficient, press Enter to continue.
8. After the file copying procedure has completed, press Enter to restart the
system.
9. The system will reboot in to the graphical portion of Windows 2000
Professional setup. Click Next to continue.
10. The locale settings can be modified on this screen. The default settings should
be sufficient. Click Next to continue.
11. Enter a valid name and the name of your organization. Click Next to continue.
12. Enter the Product ID listed on the Windows 2000 Professional CD case and
click Next to continue.
13. Enter a unique computer name.
14. Enter a password for the Administrator account and click Next.
15. The time zone settings can be adjusted on this screen. Make any necessary
adjustments and click Next.
16. Windows 2000 setup will continue unattended from this point forward. Restart
the system when prompted.
17. On the first reboot after Windows 2000 completes, the Network Identification
Wizard will appear. Click Next to start the wizard.
18. Choose a user name a password to log on to the system automatically, or
force the user to enter a user name password every time the system starts.
Click Next after you have made your choice.
19. Click Finish.
20. Login to Windows 2000 with the Administrator ID.
Updated October, 2007
6 SurePOS 700 Series: SurePOS 700-722/742/782, 723/743/783 Operating System Installation Guide
To Next Page
Loading...
Need help?
General
