Note: The Windows XP Professional installation files can be found in the i386
directory of the CD-ROM. These are the only files on the CD that are
required for installation.
5. Download and extract the Ethernet drivers for the SurePOS 700 to a directory
on the same share as the one used to store the Windows XP Professional
files.
6. Create a directory in the root of the hard disk which will store the various
drivers required by the system. Name the directory drivers. Inside the drivers
directory, create a directory for the Ethernet drivers called ethernet.
7. To copy the Ethernet drivers extracted to the network shares in to
c:\drivers\ethernet, type xcopy x:\drivers\*.* c:\drivers\ethernet /s from
the command prompt.
8. Go to c:\I386 on the hard disk.
9. Type winnt. This will launch Windows XP Professional Workstation setup.
10. After the file copying portion of setup completes, remove the network boot disk
floppy from the floppy drive and press Enter.
11. The system will reboot in to the second portion of Windows XP Professional
setup. The “Welcome to Setup” screen will appear. Press Enter to continue
installing Windows XP Professional.
12. The license agreement will appear. Read the agreement by paging down. If
you agree to follow the license agreement, press F8 to continue.
13. A menu will appear which allows the install partition to be chosen. Only one
partition will appear. Press Enter to continue.
14. If conversion to NTFS is desired, you can perform the conversion on the next
screen. If the current file system is sufficient, press Enter to continue.
15. After the file copying procedure has completed, press Enter to restart the
system.
16. The system will reboot in to the graphical portion of Windows XP Professional
setup. Click Next to continue.
17. The locale settings can be modified on this screen. The default settings should
be sufficient. Click Next to continue.
18. Enter a valid name and the name of your organization. Click Next to continue.
19. Enter the Product ID listed on the Windows XP Professional CD case and click
Next to continue.
20. Enter a unique computer name.
21. Enter a password for the Administrator account and click Next.
22. The time zone settings can be adjusted on this screen. Make any necessary
adjustments and click Next.
23. Windows XP setup will continue unattended from this point forward. Restart
the system when prompted.
24. On the first reboot after Windows XP completes, the Network Identification
Wizard will appear. Click Next to start the wizard.
25. Choose a user name a password to log on to the system automatically, or
force the user to enter a user name password every time the system starts.
Click Next after you have made your choice.
26. Click Finish.
27. Login to Windows XP with the Administrator ID.
28. Download the Windows XP Network Driver package from the web.
29. Extract the package to a blank floppy disk.
Updated October, 2007
14 SurePOS 700 Series: SurePOS 700-722/742/782, 723/743/783 Operating System Installation Guide
To Next Page
Loading...
Need help?
General
