Table 13. Memory speeds and configurations based on ranked DIMM type and
voltage (continued)
DIMM rank,
type, and
technology
DIMM
capacity
1 DIMM per
channel
2 DIMMs per
channel
3 DIMMs per
channel
Single-rank
x4 RDIMM -
2 Gb (1600
MHz)
4 GB 1600 1600 1066
Dual-rank x4
RDIMM - 2
Gb (1333
MHz)
8 GB 1333 1333 1333 1333 1066 1333
Dual-rank x4
RDIMM - 2
Gb (1600
MHz)
8 GB 1600 1600 1333
Quad-rank x4
LRDIMM - 2
Gb (1333
MHz)
16 GB 1333 1333 1333 1333 1333 1333
Quad-rank x4
LRDIMM - 4
Gb (1333
MHz)
32 GB 1333 1333 1333 1333 1333 1333
DIMM installation instructions
Attention: Static electricity that is released to internal server components when the
server is powered on might cause the server to stop, which might result in the loss
of data. To avoid this potential problem, always use an electrostatic-discharge wrist
strap and plug it into the electrostatic-discharge connector on the front of the
server (see “Front view” on page 16 for the location of this connector) or other
grounding system when you work inside the server with the power on.
The following illustration show the locations of the DIMM connectors on the
system board.
48 System x3750 M4 Types 8722 and 8733: Installation and Service Guide