4
SET MODE
4-4
Item Description Option/range Default
LOG Deletes logs. –––, CLR (Clear) –––
Reset
Initializes the transceiver.
Returns to the default values except the Bluetooth
pairing list.
NO or YES NO
FIRM UP Updates the rmware. NO or YES NO
Success Tone
Sets the successful tone for Individual calls.
L The success or failure result is also displayed
on the screen.
Disable or Enable Enable
Failure Tone
Sets the failure tone for Individual calls
L The success or failure result is also displayed
on the screen.
Disable or Enable Enable
IND Call Tone
Sets the call initiation tone.
Disable, Tone1 ~ Tone8
L Larger number makes the
tone lower.
Tone1 (Pi)
GRP Call Tone
ALL Call Tone
TEL Call Tone*
IND Crtsy Beep
Sets the call termination tone.
Disable, Tone1 ~ Tone8
L Larger number makes the
tone lower.
Tone1 (Pi)
GRP Crtsy Beep
ALL Crtsy Beep
TEL Crtsy Beep*
IND RX Tone
Sets the call receive tone.
Disable, Tone1 ~ Tone8
L Larger number makes the
tone lower.
Disable
Grp RX Tone
All RX Tone
Tel RX Tone*
MSG RX Tone
IND Notify Type
Sets the call receive notication type. Pocket beep or P-Bell P-Bell
GRP Notify Type
ALL Notify Type
TEL Notify Type*
IND Notify No.
Sets the number of tone.
Continuous, 1, 3, 10, 20 (times)
3 (times)
GRP Notify No.
ALL Notify No.
TEL Notify No.*
MSG Notify No.
RX Notify Actn. Sets the call or message receive notication type.
Tone, Vibration, Notication
Beep + Vibration
Tone
RX Notify Vol.
Sets the call or message receive notication vol-
ume.
0 ~ 32 10
Out of Rng Tone
Sounds the out-of-area warning beep. The beep
also sounds when the transceiver reenters the
service area.
(
Out-of-area:
“
Pipi,
”
Reenters：
“
Popo
”
)
Disable or Enable Disable
Range Side Tone
Mutes the sidetone when the transceiver is out-
of-area.
Disable or Enable Disable
■ Set mode item list
The shaded items (■ ■ ) are also displayed in the Basic Set mode.
LItems or default values may differ, depending on the presetting. Ask your dealer for details.
*Feature in the near future.
To Next Page
Loading...
Need help?
General
