2
New2001
PANEL DESCRIPTION
2
■ Front panel
Function display (p. 4)
Speaker
qw e
r
w
e
t
y
io
u
The angle brackets show common or special display op-
erations, as described below:
• <Common> shows the common operation.
• <In the plotter display> shows the plotter display opera-
tion.
• <In the target list display> shows the target list display
operation.
• <In the danger list display> shows the danger list dis-
play operation.
q DISPLAY MODE KEY [DISP MODE]
<Common>
➥ Push to switch the display mode between the plotter,
target list and danger list. (pp. 4−6)
➥ While in the Menu mode, push to exit it, and return to
the plotter, target list or danger list display which was
selected before you entered the Menu mode.
w LEFT AND RIGHT KEYS [Ω]/[≈]
<Common>
While in the Menu item setting mode, push to select a
menu option. (pp. 31, 35)
<In the plotter display>
➥ Push [Ω] to sequentially select each AIS target icon far-
thest from your vessel (or waypoint, if it is set; see page
26 for setting detail).
(p. 15)
➥ Push [≈] to sequentially select each AIS target icon
closest to your vessel (or waypoint, if it is set; see page
26 for setting detail).
(p. 15)
•
A target box will appear around the selected target or waypoint
icon.
<In the danger list display>
➥ Push [Ω] to sort the AIS target data by CPA (Closest
Point of Approach).
(p. 17)
➥ Push [≈] to sort the AIS target data by TCPA (Time to
CPA).
(p. 17)
To Next Page
Loading...
Need help?
General
