20
deburr. Slide strain relief in cover cutout and slide cover over gearmotor and adapter lining
up holes. Apply Loctite® #243 or equal to threads of #6-32 screws reinstall and tighten.
2.3. How To Use This Manual
This manual was developed for the purposes of FAST team and OEM support. This manual pro-
vides information and procedures to perform MIV maintenance (preventive and corrective). The
manual also provides information to be used to troubleshoot and R&R failed components.
The Introduction section is of interest to management for MIV familiarization, visual recognition,
system identification documentation, and risk assessment information (an EN 1028 only require-
ment).
The Safety section is of interest to both management and maintainers as it provides precautions
for maintenance (including operation for maintenance purposes) and definitions of dangers,
warnings, cautions, notices, and notes. This section also provides a summary of both PPE and a
DANGER/WARNING/CAUTION/NOTICE summary. The section provides a single point view of com-
piled hazards and PPE in a condensed format. The appropriate DANGER, WARNING, CAUTION,
NOTICE, and PPE listed also appear at each point of use throughout the manual.
Notice that the use of this manual also requires maintenance personnel to have received Hale
training prior to using it. Use Hale Training Academy (Pumping And Maintenance) training
(see paragraph Error! Reference source not found., Training – page Error! Bookmark not
defined.) and the two Maintenance sections for all aspects of maintaining the MIV system. These
include:
Within the two Maintenance sections, the troubleshooting provided utilizes SCR tables, which
provide the list of known symptoms associated with a MIV trouble/problem/failure. To use a SCR
table, locate the indicated SYMPTOM, verify the associated CAUSE (the maintainer must verify
ALL the associated causes if multiple causes are listed) and then perform the associated REM-
EDY (or remedies). The component repair is treated as bench procedures. Maintenance requires
the associated repair kit be utilized. Utilizing the associated repair kit ensures all the required
components are available for replacement. Utilizing the repair kits as intended prolongs system
performance and supports the manufacturer’s warranty.
Performing a procedure is NOT the ONLY key action in maintaining the system, documentation of
the Preventive Maintenance, R&R, and SYMPTOM/REMEDY history is also key to maintaining
each MIV system (including meaningful tracking of when each issue occurred). A maintenance
log with meaningful entries will provide invaluable insight, time/money savings (in reduced down
time and shorted troubleshooting time), and cost savings over the life cycle of the system.
2.4. Disclaimer
Our policy is one of continuous development. We therefore reserve the right to amend specifica-
tions without notice or obligation.
2.5. Principles Of Operation
This section provides the principles of operation for maintainers to use when communicating
with an OEM/apparatus manufacturer or a Hale Customer Support representative
To Next Page
Loading...
Need help?
General