Idex HALE MIV 2.0 User Manual

25
3. PREVENTIVE MAINTENANCE
Hale Products recommends the preventive maintenance and inspections listed in Table 2.
Table 2. Recommended Preventive Maintenance
Interval
Check/Test
Action Required
Item(s) Required
After Each Use
Visual Check
Inspect the valve to make sure there is no de-
bris caught between the valve body and valve
disc. Also, verify no damage to valve disc.
None
Saltwater, Foam or
Contaminated Wa-
ter Operation
Flush valve and pump with fresh water in ac-
cordance with departmental procedures
Clean water
Lubricate MIV Disc
Using lubrication ports on MIV to lubricate MIV
disc to ensure proper movement
Allen wrenches, Su-
per-Lube
Functional Check
None
3.1. MIV Disc Lubrication
The following will provide instructions on lubricating the MIV disc while the MIV is installed using
the inline lubrication techniques.
1. Ensure MIV is in the close position
2. Mark a spot on the MIV motor as your “zero/start” position
3. Lubrication ports are in the positions below.
Figure 9. MIV LUBRICATION PORTS

Idex HALE MIV 2.0 Specifications

General

Brand	Idex
Model	HALE MIV 2.0
Category	Control Unit
Language	English