19
iM3 Dental Systems
Lubrication of Handpieces
All handpieces should be lubricated regularly. We
recommend the use of Triflow Teflon Lubricant
®
before
or after use, however check with the handpiece
manufacturers recommendations. The foot pedal
should be depressed for 5-10 seconds after oiling to ensure
the lubricant will reach the turbines and
working portions of the handpiece.
The lubricant is placed in the smaller of the 2 large holes, (a).
“Air entry hole” at the base of the handpiece.
NOTE:
DON’T FORGET TO DEPRESS
THE FOOT CONTROL AFTER
OILING TO ENSURE LUBRICANT
REACHES THE TURBINES.
Maintenance instructions are printed on
the back of the dental machine
OIL here
(a) Air entry hole (smaller of the 2 large holes)
Water intake hole
Chip air hole
(b) Exhaust hole
To Next Page
Loading...
Need help?
General