4
iM3 GS Control Panel
(A) Corian ® Work Surface with Bur groove around the edge, to prevent them falling on the floor.
(B) Amber coolant reservoir with particle filter. The amber bottle allows the use of CLS, which is
light sensitive (contains chlorhexadine) or distilled water. Located at the back of the unit.
(C) Handpiece Selector switch, selects either the Low speed or the High Speed Handpiece.
(D) Low Speed Handpiece – used for polishing, low speed cutting, orthopedics – 20,000 RPM.
(E) 3 way syringe – air, water, or mist when both buttons are pressed together. When used
with CLS it will help sanitize the mouth and reduce mouth odour during procedures.
(F) Provision for CLS handpiece flush system. (standard on the GS Deluxe)
(G) Pressure gauge for checking handpiece pressure.
(H) Coolant Flow Control – regulates the amount of liquid to the high speed bur.
(I) High Speed Handpiece for high speed cutting,also available with Fibre Optics.
(J) Choice of Stand – Air operated long reach wall arm & Stainless Steel height adjustable floor
stand.
(K) Exhaust collection bottle for high and low speed handpieces
iM3 is a licensed trademark of iM3 Inc. Corian ® is a registered trademark of the
DUPONT Company
(A) (B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
iM3 Dental Systems
To Next Page
Loading...
Need help?
General