5
iM3 GS Deluxe Control Panel
(A) Corian ® Work Surface with Bur groove around the edge, to prevent them falling on the floor.
(B) Clear coolant reservoir with particle filter.
(C) Handpiece Selector switch for the selection of low speed or High Speed Handpiece.
(D) Low Speed Handpiece – used for polishing, and low speed cutting – 20,000 RPM.
(E) 3 way syringe – air, water, or mist when both buttons are pressed together. When used
with CLS it will help sanitize the mouth and mask mouth odours.
(F) High speed CLS handpiece flush system.
(G) Pressure gauge for setting handpiece pressure.
(H) Coolant Flow Control – regulates the amount of liquid to the high speed bur.
(I) High Speed Handpiece – for high speed cutting – also available with Fibre Optics.
(J) Choice of Stand – Wall mounted air activated arm and Stainless Steel Height adjustable
stand.
(K) The amber bottle allows the use of CLS, which is light sensitive (contains chlorhexadine)
(L) Water/CLS selector toggle.
(M) Exhaust bottle for High and Low speed handpieces and CLS flush.
(N) Maintenance Instructions. New GS machines have the maintenance printed on the back of
the machine.
(O) Height adjustable Stainless Steel instrument tray
iM3 Dental Systems
A
B
C
D
E
F
G
H
I
J
K
L
C
M
N
O
To Next Page
Loading...
Need help?
General