9
iM3 Distilled Water and CLS Enviro Solution Supply
Each iM3 dental system is supplied with an amber or clear water bottle which should be filled only
with distilled water to assist in preventing mineral or bacteria build up in the handpieces. This water
bottle supplies the high speed handpieces, 3 way air water syringe and ultra sonic scaler coolant
outlet .
The CLS Enviro Solution supply and water system allows you to choose between distilled water or
CLS Solution at the flick of a switch, depending on the dental procedure you wish to perform. The
CLS solution contains chlorhexidine which is light sensitive and should be kept in the amber bottle
provided.
The coolant system for your iM3 dental system, has been preset at 25 psi.
Refilling Coolant Bottles
To refill the distilled water or CLS solution, flip the pressure switch on your dental system to OFF -
depressurizing the system. After the system has been depressurized, unscrew the bottle and refill
with either distilled water or CLS Solution. After filling the coolant bottle screw it back into the holder
and flip the pressure switch to ON, repressurizing the system. DO NOT OVERTIGHTEN THE BOT-
TLES.
Please Note: When the day’s dental procedures are complete, flip the ON/OFF pressure switch to
the OFF position, depressurizing the coolant bottles for storage.
Cleaning
Bottles maybe sterilized with ethylene oxide or by chemical sterilization.
Here’s what Dr Jeanie Hawkins, DVM, Diplomat AVDC had to
say about CLS Solution and the Auto Flush System…..
“Having CLS Solution at my fingertips to flush periodontal pockets is a real plus.
iM3® is the only Company to address the problem of cleaning the airlines and high
speed handpieces of scalers by using a moment button to release CLS Solution
into the airline.”
iM3 Dental Systems
On / Off pressure
switch
CLS Solution in
Amber bottle
Distilled water in
clear bottle
Ultrasonic Scaler
coolant outlet
To Next Page
Loading...
Need help?
General