6
REAR OF iM3 GS & Deluxe
(1) With the coolant bottle pressure switch in the “ON”
position, the bottle will be pressurized to 35PSI (approx. 2.5 bar) to supply water/CLS to the 3
way syringe and the High Speed Handpiece. It must be switched to the off position to release the
pressure before re filling the bottle.
(2) Ultra Sonic Coolant outlet – This will supply pressurized water/CLS to your ultrasonic dental
scaler – A male fitting can be supplied by iM3 for your ultrasonic scaler water line. DO NOT use
any coolant other than distilled water or CLS – any other solution may cause a blockage and will
void your warranty.
(3) Either a clear or amber (if CLS is to be used) PET pressure bottle is supplied, a used soft
drink bottle may be used in an emergency situation, a new un-used bottle from iM3 is
recommended to avoid splitting if using a pre used bottle.
(4) Amber coolant bottle for the use of CLS in the GS Deluxe. The user can switch between water
and CLS (page 5 (L)).
(2) Ultra Sonic Cool-
ant Outlet
(1) Coolant Bottle
Pressure Switch
(3) PET Pressure Coolant Bottle
(amber on GS clear on GS
Deluxe)
(4) PET Pressure Coolant Bottle
amber (GS Deluxe only)
iM3 Dental Systems
To Next Page
Loading...
Need help?
General