Inovance CS200-4T75GB User Manual

Chapter 6 EMC
- 92 -
Chapter 6 EMC
6.1 Denition of Terms
Electromagnetic compatibility (EMC) describes the ability of electronic and electrical devices or systems to work
properly in the electromagnetic environment and not to generate electromagnetic interference that inuences other
local devices or systems.
In other words, EMC includes two aspects: The electromagnetic interference generated by a device or system
must be restricted within a certain limit; the device or system must have sufcient immunity to the electromagnetic
interference in the environment.
•
First environment
Environment that includes domestic premises, it also includes establishments directly connected without
intermediate transformers to a low-voltage power supply network which supplies buildings used for domestic
purposes
•
Second environment
Environment that includes all establishments other than those directly connected to a low-voltage power
supply network which supplies buildings used for domestic purposes
•
Category of C1 AC drive
Power drive system (PDS) of rated voltage less than 1000 V, intended for use in the rst environment.
•
Category of C2 AC drive
PDS of rated voltage less than 1000 V, which is neither a plug in device nor a movable device and, when used
in the rst environment, is intended to be installed and commissioned only by a professional
•
Category of C3 AC drive
PDS of rated voltage less than 1000 V, intended for use in the second environment and not intended for use in
the rst environment
•
Category of C4 AC drive
PDS of rated voltage equal to or above 1000 V, or rated current equal to or above 400 A, or intended for use in
complex systems in the second environment
6.2 Introduction to EMC Standard
6.2.1 EMC Standard
The CS200 series AC drive satises the requirements of standard EN 61800-3. 2004 Category C2. The AC drives
are applied to both the rst environment and the second environment.
6.2.2 Installation Environment
The system manufacturer using the AC drive is responsible for compliance of the system with the European
EMC directive. Based on the application of the system, the integrator must ensure that the system complies with
standard EN 61800-3. 2004 Category C2, C3 or C4.

Inovance CS200-4T75GB Specifications

General

Brand	Inovance
Model	CS200-4T75GB
Category	DC Drives
Language	English