Inovance IMC30-6G Series User Manual

- 25 -
3 Hardware Connection
The wiring of low-speed position comparison output is as follows:
"YJTDPOUSPMNPEVMF

&YUFSOBM7%$
0QUPDPVQMFS
0QUPDPVQMFS
$0.

7TJOHMFFOEFE
USJHHFSJOHEFWJDF
5SJHHFS
&YUFSOBM7
&97
&97
&90
&97
&97
Figure 3-8 Wiring of low-speed position comparison output
NOTE
◆ When using the low-speed position comparison output function,
set EX-O0 to EX-O3 (general output bit0 to bit3) as the low-
speed position comparison output interface using the IMC_
SetLocalGpoUseType instruction. For details of the function, refer
to the IMC30G Series Motion Control Card Software Programming
Manual.
3.6 Description and Wiring of General Input Interface
EX_I
17 15 13 11 9 7 5 3 1
18 16 14 12 10 8 6 4 2

Inovance IMC30-6G Series Specifications

General

Brand	Inovance
Model	IMC30-6G Series
Category	Control Unit
Language	English