Mechanical and Electrical Installation MD280/MD280N User Manual
- 42 -
Chapter 3 Mechanical and Electrical
Installation
3.1 Mechanical Installation
3.1.1 Installation environment:
1) Ambient temperature: The ambient temperature exerts great influences
on the service life of the inverter and is not allowed to exceed the allowable
temperature range (-10 ć Celsius to 50 ć Celsius).
2) The inverter shall be mounted on the surface of incombustible articles,
with sufficient spaces nearby for heat sinking. The inverter is easy to
generate large amount of heat during the operation. The inverter shall be
mounted vertically on the base with screws.
3) The inverter shall be mounted in the place without vibration or with
vibration of less than 0.6G, and shall be kept away from such equipment as
punching machine.
4) The inverter shall be mounted in locations free from direct sunlight, high
humidity and condensate.
5) The inverter shall be mounted in locations free from corrosive gas,
explosive gas or combustible gas.
6) The inverter shall be mounted in locations free from oil dirt, dust, and
metal powder.
Fig.3-1MD280 Inverter Installation Diagram
efesotomasyon.com
To Next Page
Loading...
Need help?
General