6.2 Proceed for Door operator commissioning:-
6.2.1 For Auto Door
NICE 1000 system is capable for double side door operator system (Front and Back Doors)
Door Open Limit and Door Close Limit switches feedbacks are mandatory for NICE 1000 system
function (to be connected to X14 and X18 Default input terminals for Front door)
Field Wiring Diagram suitable for NICE 900 Door Drive with NICE1000 Controller
If the third party door drive system is used, follow the door drive commissioning instruction and
commission the door drive along with NICE1000 input and output interconnections as shown in above
model wiring diagram
Follow the commissioning procedure provided by door operator system supplier
Once door operator function is completed successfully, Elevator is ready for Normal operation with
rated speed
To Next Page
Loading...
Need help?
General
