Intel S1200BTLRM Specification

Intel® Server Board S1200BT TPS Appendix D: POST Code Errors
Revision 1.0
Intel order number G13326-003
135
POST Error Beep Codes
The following table lists POST error beep codes. Prior to system video initialization, the BIOS
uses these beep codes to inform users on error conditions. The beep code is followed by a
user-visible code on POST Progress LEDs.
Table 60. POST Error Beep Codes
Beeps
Error Message
POST Progress Code
Description
3
Memory error
Multiple
System halted because a fatal error related to the memory
was detected.
The following Beep Codes are from the BMC, and are controlled by the Firmware team. They are listed here for
convenience.
1-5-2-1
CPU socket
population error
N/A
CPU1 socket is empty.
1-5-2-4
MSID Mismatch
N/A
MSID mismatch occurs if a processor is installed into a
system board that has incompatible power capabilities.
1-5-4-2
Power fault
N/A
DC power unexpectedly lost (power good dropout) – Power
unit sensors report power unit failure offset
1-5-4-4
Power control fault
N/A
Power good assertion timeout – Power unit sensors report
soft power control failure offset

Intel S1200BTLRM Specifications

General

Brand	Intel
Model	S1200BTLRM
Category	Server Board
Language	English