ITech IT-M3400 Series Programming Guide

Parallel&Link Commands
Copyright © Itech Electronic Co., Ltd. 82
Chapter14 Parallel&Link Commands
PARallel:ROLE <SINGle|SLAVe|MASTer>
This command sets the power supply to single, slave or master mode in the
parallel operation.
Syntax
PARallel:ROLE <SINGle|SLAVe|MASTer>
Arguments
SINGle|SLAVe|MASTer
Example
PAR:ROLE SLAV
Query syntax
PARallel:ROLE?
Returns
SINGle|SLAVe|MASTer
PARallel:GROup <group>
This command specifies the parallel group.
Syntax
PARallel:GROup <group>
Arguments
<A-H>
Example
PAR:GRO 1
Query syntax
PARallel:GROup?
Returns
NR1

ITech IT-M3400 Series Specifications

General

Brand	ITech
Model	IT-M3400 Series
Category	Power Supply
Language	English