ITech IT-M3400 Series Programming Guide

Trigger Commands
Copyright © Itech Electronic Co., Ltd. 40
INITiate[:IMMediate]:LIST
this command is used to launch the LIST file. When the List finishes running, the
interface displays END, and this command can be sent to initialize the List again to
wait for triggering running state.
Syntax
INITiate[:IMMediate]:LIST
Arguments
None
Example
INIT:LIST
Returns
None
ABORt:LIST
This command is used to reset the list program to idle state.
Syntax
ABORt:LIST
Arguments
None
Example
ABOR:LIST
Returns
None

ITech IT-M3400 Series Specifications

General

Brand	ITech
Model	IT-M3400 Series
Category	Power Supply
Language	English