To Next Page

To Previous Page

Quick Reference

Keys Description

[V-set] Set the voltage value

In CV priority (default) mode, press [V-set] and set the

output voltage value. In CC priority mode, press[V-set]

and set the upper limit of voltage.

[I-set] Set the current value

In CV priority, press [I-set] and enter the current value

setting state. Repress [I-set] and setting the I+ limit and I-

limit. In CC priority, press [I-set] to setting the output

current.

[P-set] Set the power value

[R-set] Set the resistance value.

[On/Off] Power supply output on/off key

[Enter] Operation confirmation key.

[Esc] Press this key to cancel the present input or exit the

present operation interface.

The left navigation keys is used to adjust the cursor to the

specified position or scrolls pages to view menu items.

Long pressing this key and enter to save function, and

key is light.

The right navigation keys is used to adjust the cursor to

the specified position or scrolls pages to view menu items.

Long pressing this key and enter to recall function, and

key is light.

Composite key [Shift], combined with other keys to realize functions marked

above keys. Firstly, press [shift] and the shift key will be lighted, and then press

the function key, the detailed functions are listed as follows.

Keys Description

[Shift]+[V-set](Config) Enter the Config menu. Used to set the

configuration parameters.

[Shift]+[I-set](Function) Enter the Function menu. Used to set the list

function, Battery test function.and battery

simulation..

ITech IT-M3412 User Manual

Questions and Answers: