ITech IT-M3412 User Manual

System-Related Functions
2：Re-Energy
3：AHour
4：WHour
5：Reset Meas
6：Reset ReE
• UUT Temp: temperature measurement value.
• Re-Energy: the regenerative power information.
• AHour: the capacity information of the present discharge or charge
test, which is also cleared when the battery test mode or battery
simulation mode is turned on.
• WHour: the power statistics information, when the battery test mode
or battery simulation mode is turned on, the data will also be cleared.
• Reset Meas: The zero-clearing operation, when the instrument is re-
powered or the source /load is switched it will be also performed.
• Reset ReE: The zero-clearing regenerative power information
operation.
d. Press [Esc] to exit.
The information will display on the home screen when the Ext-Meter Disp
set to On in system menu, the operation refers to 7.4.7 Observe the DUT
Temperature and Total Historical Regenerative Power.
12.000V 10.000A
38.0℃ 1000.0Wh
7.6 Observe the Regenerative power and
Capaticy
User can observe the total historical regenerative power and capacity
information on screen.
1. Press the composite keys [Shift]+[P-set](System) to enter the system
menu.
2. Rotate the knob to select the External Meter and press [Enter] to confirm.
3. The DUT temperature, total historical regenerative power and capacity are
displayed on screen.
1：UUT Temp
2：Re-Energy
3：AHour
4：WHour
5：Reset Meas
6：Reset ReE
• UUT Temp: indicates the DUT temperature.
Copyright © Itech Electronic Co., Ltd.
82

ITech IT-M3412 Specifications

General

Brand	ITech
Model	IT-M3412
Category	Power Supply
Language	English