Quick Reference
• Stand-alone power up to 144kW, expandable in parallel up to 1.152MW
• Voltage output ratings: 0-2250V
• Current output ratings: 0-2040A
• High power density design provides 18kW in 3U space
• Bi-directional energy transmission, seamless switching across two
quadrants
• Support CC/CV loop speed and priority setting
• Built-in voltage curves comply with DIN 40839, ISO-16750-2/ISO21848
automotive standards
• High efficient energy recovery
• Support solar panel I-V curves simulation
• Built-in waveform generator, support generating arbitrary waveforms
• Adjustable output impedance
• Complete protection, support OVP, ±OCP, ±OPP, OTP, voltage transient
drop protection and anti-islanding protection
• Built-in USB/CAN/LAN/digital IO interface, Optional GPIB/Analog&RS232
• Support data saving and the shortest interval of sampling is 10μs
• Battery simulator
The IT6000 series was designed to allow paralleling of multiple units to
create larger power systems. Expandable in master and slave parallel Up to
1152kW. All program is performed from the master unit front panel or remote
control interfaces. Consolidated current and power measurements are
reported on the master unit. The function and operation of the instrument are
the same as that of the single power supply. For detailed specifications,
please contact ITECH service.
Voltage
Level
Model Voltage Power
500V
IT6006B-500-40 40A 6KW
IT6012B-500-80 80A 12KW
IT6018B-500-120 120A 18KW
500V
IT6006B-500-30 30A 6KW
IT6012B-500-60 60A 12KW
IT6018B-500-90 90A 18KW
IT6018B-500-90S 90A 18KW
Copyright © Itech Electronic Co., Ltd.
2
To Next Page
Loading...
Need help?
General
