Copyright © Itech Electronic Co., Ltd.
V
IT6000B Series User Manual
Environmental Conditions
Requirements
Operating temperature 0°C～50°C
Operating humidity 20%～80%( non-condensation)
Storage temperature -10°C～70 °C
Altitude Operating up to 2,000 meters
Installation category II
Pollution degree Pollution degree 2
In order to ensure the accuracy of measurement, it is recommended to oper-
ate the instrument half an hour after start-up.
Regulation Tag
The CE tag shows that the product complies with the
provisions of all relevant European laws (if the year is
shown, it indicates that the year when the design is
approved).
The UKCA tag shows that the product complies with
the provisions of all relevant United Kingdom laws (if
the year is shown, it indicates that the year when the
design is approved).
This instrument complies with the WEEE directive
(2002/96/EC) tag requirements. This attached product
tag shows that the electrical/electronic product cannot
be discarded in household waste.
This symbol indicates that no danger will happen or
toxic substances will not leak or cause damage in nor-
mal use within the specified period. The service life of
the product is 10 years. The product can be used
safely within the environmental protection period; oth-
erwise, the product should be put into the recycling
system.
To Next Page
Loading...
Need help?
General
