Basic Operation
Table 6–1 Initial value of the parameter
Category
Parameter Initial Value
Main inter-
face
(Source
mode)
Voltage setting: Vs
One percent of the
rated voltage of the
instrument
Current setting: Is One percent of the
rated current of the
instrument
Upper limit of voltage: Vh, and
lower limit of voltage: Vl
Upper limit value: One
percent of the rated
voltage of the
instrument
Lower limit value: 0
Upper limit of current: I+, and
lower limit of current: I-
One percent of the
rated current of the
instrument
Upper limit of power: P+, and
lower limit of power: P-
Rated power value of
the instrument
[On/Off] status Off
Config
menu
(Source
mode)
Mode CV
Speed High
V-Rise Time/I-Rise Time 0.1s
V-Fall Time/I-Fall Time
Output Res 1000
On Delay/Off Delay 0
Table 6–2 Initial value of the parameter
Category
Parameter Initial Value
Main inter-
face(Load
mode)
Voltage setting under CV
mode: Vs
Rated voltage of the
instrument
Copyright © Itech Electronic Co., Ltd.
177