To Next Page

To Previous Page

III

IT6000D Series User Manual

• Do not use the instrument if it is damaged. Before operation, check

the casing to see whether it cracks. Do not operate the instrument

in the presence of inflammable gasses, vapors or dusts.

• The instrument is provided with a power cord during delivery and

should be connected to a socket with a protective earth terminal, a

junction box or a three-phase distribution box. Before operation, be

sure that the instrument is well grounded.

• Please always use the provided cable to connect the instrument.

• Check all marks on the instrument before connecting the instru-

ment to power supply.

• Ensure the voltage fluctuation of mains supply is less than 10% of

the working voltage range in order to reduce risks of fire and elec-

tric shock.

• Do not install alternative parts on the instrument or perform any un-

authorized modification.

• Do not use the instrument if the detachable cover is removed or

loosen.

• To prevent the possibility of accidental injuries, be sure to use the

power adapter supplied by the manufacturer only.

• We do not accept responsibility for any direct or indirect financial

damage or loss of profit that might occur when using the

instrument.

• This instrument is used for industrial purposes, do not apply this

product to IT power supply system.

• Never use the instrument with a life-support system or any other

equipment subject to safety requirements.

ITech IT6000D Series User Manual

Questions and Answers: