ITech IT6300 Series Programming Guide

System Commands
Copyright© Itech Electronic Co., Ltd. 21
STATus:QUEStionable:INSTrument:ISUMmary1:ENABl
e
This command can re-write the parameter of query enable register in channel
1.
Command syntax
STATus:QUEStionable:INSTrument:ISUMmary1:ENABle
Arguments
Register parameter
Query syntax
STATus:QUEStionable:INSTument:ISUMmary1:ENABle?
STATus:QUEStionable:INSTrument:ISUMmary1:COND
ition?
This command can query the parameter of query status register in channel 1.
Query syntax
STATus:QUEStionable:INSTrument:ISUMmary1:CONDition?
Arguments
None
STATus:QUEStionable:INSTrument:ISUMmary2[:EVEN
t]?
This command can query the event register in channel 2. When the query value
is returned, the register is reset.
Query syntax
STATus:QUEStionable:INSTrument:ISUMmary2[:EVENt]?
Arguments
None
STATus:QUEStionable:INSTrument:ISUMmary2:ENABl
e
This command can re-write the parameter of query enable register in channel
2.
Command syntax
STATus:QUEStionable:INSTrument:ISUMmary2:ENABle

ITech IT6300 Series Specifications

General

Brand	ITech
Model	IT6300 Series
Category	Power Supply
Language	English