ITech IT6300 Series Programming Guide

Display Commands
Copyright© Itech Electronic Co., Ltd. 37
Chapter5 Display Commands
DISPlay[:WINDow][:STATe]
This command is used to switch the status of the display.
Command syntax
DISPlay[:WINDow][:STATe]
Arguments
ON/OFF
Query syntax
DISPlay[:WINDow][:STATe]?
DISPlay[:WINDow]:TEXT[:DATA]
This command is used to display the specified characters.
Command syntax
DISPlay[:WINDow]:TEXT[:DATA]
Arguments
String, double quotes
Query syntax
DISPlay[:WINDow]:TEXT[:DATA]?
DISPlay[:WINDow]:TEXT:CLEar
This command is used to clear the characters on the display and return to the
normal display state.
Command syntax
DISPlay[:WINDow]:TEXT:CLEar
Arguments
None

ITech IT6300 Series Specifications

General

Brand	ITech
Model	IT6300 Series
Category	Power Supply
Language	English