ITech IT6300 Series Programming Guide

System Commands
Copyright© Itech Electronic Co., Ltd. 23
STATus:QUEStionable:INSTrument:ISUMmary3:COND
ition?
This command can query the parameter of query status register in channel 3.
Query syntax
STATus:QUEStionable:INSTrument:ISUMmary3:CONDition?
Arguments
None
STATus:OPERation[:EVENt]?
This command can read the parameter from operation event register.
After executing this order, operation event register is reset.
Query syntax
STATus: OPERation [:EVENt]?
Arguments
None
Returns
<NR1>
Related Command
STATus:OPERation:ENABle
Bit description of operation event register:
Bit
7
6
5
4
3
2
1
0
Name
no use
no use
no use
no use
no use
no use
ON
CAL
Value
2
1
STATus:OPERation:CONDition?
This command can be used to read the value of the operating condition register.
When the value of a bit in the operating condition register changes, the
corresponding bit in the operation event register is set to 1.
Query syntax
STATus: OPERation: CONDition?
Arguments
None
Returns
<NR1>

ITech IT6300 Series Specifications

General

Brand	ITech
Model	IT6300 Series
Category	Power Supply
Language	English