ITech IT6300 Series Programming Guide

System Commands
Copyright© Itech Electronic Co., Ltd. 26
STATus:OPERation:INSTrument:ISUMmary2:ENABle
This command can re-write the parameter of operation enable register in the
channel 2.
Command syntax
STATus:OPERation:INSTrument:ISUMmary2:ENABle
Arguments
Register parameter
Query syntax
STATus:OPERation:INSTrument:ISUMmay2:ENABle?
STATus:OPERation:INSTrument:ISUMmary2:CONDitio
n?
This command can query the parameter of operation event register in channel
2.
Query syntax
STATus:OPERation:INSTrument:ISUMmary2:CONDition?
Arguments
None
STATus:OPERation:INSTrument:ISUMmary3[:EVENt]?
This command can query the parameter of operation event register in channel
3. After executing this order, the register is reset.
Query syntax
STATus:OPERation:INSTrument:ISUMmary3[:EVENt]?
Arguments
None
STATus:OPERation:INSTrument:ISUMmary3:ENABle
This command can re-write the parameter of operation enable register in the
channel 3.
Command syntax
STATus:OPERation:INSTrument:ISUMmary3:ENABle
Arguments
Register parameter

ITech IT6300 Series Specifications

General

Brand	ITech
Model	IT6300 Series
Category	Power Supply
Language	English