Quick Start
Copyright ©ITECH Electronic Co., Ltd. 5
Chapter2 Quick Start
This chapter introduces power-on check steps of IT6500D series to ensure normal start-up
and usage under initialization status. This part also introduces the front panel, the rear
panel, key functions and VFD display function of the power supply, make sure that you
can quickly know the appearance, instruction and the key function before you operate the
power supply, Help you make better use of this series of power supply.
2.1 Brief Introduction
IT6500 series is a flexiable range single output high power supply.With wide power
ranges from 800W to 6KW,currents from 30A to 240A.Standard RS232,USB,
GPIB,RS485 and LAN interfaces included on the rear board provide flexibility for remote
operation of the power supply.Its compact 1U(1200W) to 4U(6KW) size form factor
makes it ideal for use in a standard 19-inch rack.IT6500 series is specially designed for
automobile electronic industry.It provides built-in DIN40839 and ISO16750-2 waveforms
to test the anti-jamming performance of products,such as DVD and sound equipment.
Convenient bench-top features:
Auto-Range function
High Resolution Display (1mV/1mA)
Small size of 1U and 2U
RS232/USB/GPIB/RS485 standard interfaces
Analog Control Interface
Master/Slave Mode for Series/Parallel connectivity
Adjustable voltage slope (rise and fall time)
Sequence programming (List mode)
Built-in DIN40839 and ISO16750-2 waveform(IT6512/IT6513 characteristic)
OVP and OPP protection
Low ripple and low noise
Intelligent fans control
2.2 Front Panel Introduction
IT6500 series power supply different models are not the same front board. the detail front
board and key function schematic graph of the power supply are shown as below.
To Next Page
Loading...
Need help?
General
