IVT GreenlineC User Manual

56
Commissioning the heat pump
Navigating the menu list
• The example shows you how to navigate menu display 5.13.
Main menu
Indoor temperature
settings 1
Return Select
Commiss./Service
Select operation
mode A B C 5.1
Return Select
Commiss./Service
Connected extra
sensor in op. 5.13
Return Select
Main menu
Commiss./Service
for installer 5
Return Select
Extra sensor(s)
Confirming…
Extra sensor(s)
GT4 GT5
Return Confirm
Extra sensor(s)
GT4 GT5
Return Confirm
Rego600 I/S
020312 12.00.00 Ti
Heat Info Menu
Keep the “Menu” button pressed
down for 10 seconds until I/S
appears in the top right hand
corner. Press “Menu” again...
... to arrive at line 1, which is
about heating settings. Then
turn...
... the knob to the right to go
down in the menu to line 5. It
should...
... look like this when you move
to line 5. Press “Select” to come
into the Commiss/Service
menu...
... you then see this display. Now
turn the knob to the right until
you come down to display 5.13...
... it should look like this. Press
“Select” to enter these menus.
You can now...
... confirm the extra sensors you
have connected by pressing
“Confirm”. After a short time...
... “Confirming...”appears in the
display so you know your
settings have been registered.
You then see this display...
... again. Press “Return” twice to
return to the main display again.

IVT GreenlineC Specifications

General

Brand	IVT
Model	GreenlineC
Category	Heat Pump
Language	English