Page 51
15.0 Troubleshooting - Procedures
troubleshooting instructions.
PROBLEM PROCEDURE
NONE OF THE
COMPONENTS
pump light)
1. If there are letters or symbols displayed on the
screen, refer to the previous section to deter-
mine the meaning and action required.
2. If nothing appears on the screen:
B. Contact you dealer or authorized service
center
Depress “JETS” button.
1. If no sound is detected or if a “buzzing” sound
to the spa and contact your dealer or service
center.
instructions below.
B. Contact dealer or authorized service center.
Pump Priming Instructions:
1. Turn off power to the spa.
2. Remove the handle from the massage selector supplied by the
pump you are priming.
listening for the air to seep out.
To Next Page
Loading...
Need help?
General
