Jacuzzi J-460 User Manual

Page 68
Wireless Remote Battery Replacement Procedure
1. Start by removing the rubber cover to the

2. Turn the remote unit over and locate the battery
door. (Figure B)
 
until the dot aligns with the Open arrow (Figure C).
4. Remove battery door using coin to pry the door upward
(Figure D).
5. Replace battery using CR2025 or equivalent (Figure E).
6. Reinstall the battery cover, using the coin to close
(Figure F).
7. Reinstall rubber housing onto remote
(Figure G).
Note: Remote unit is water resistant, therefore the unit
should never be left in the spa while the cover is on and spa is not in use.
2/3
LIGHTSNC AIR
SPA
JETS
1
2/3
LIGHTSNC AIR
SPA
JETS
1

105358
www.polyplanar.com
Poly-Planar Inc.
Warminster, PA 18974
(215) 675-7805
Made in China
OPEN
CLOSED
Battery
Door
105358
www.polyplanar.com
Poly-Planar Inc.
Warminster, PA 18974
(215) 675-7805
Made in China
OPEN
CLOSED
Battery
Door
Fig. BFig. B
OPEN
CLOSED
OPEN
CLOSED
Fig. CFig. C
OPEN CLOSEDOPEN CLOSED
Fig. DFig. D
OPEN
CR2025
CLOSED
OPEN
CR2025
CLOSED
Fig. EFig. E
OPEN
CLOSED
OPEN
CLOSED
Fig. FFig. F
2/3
LIGHT MODE
Hot Tub
JETS
1
2/3
LIGHT MODE
Hot Tub
JETS
1
Fig. GFig. G

Jacuzzi J-460 Specifications

General

Brand	Jacuzzi
Model	J-460
Category	Hot Tub
Language	English