Page 60
re-enabled.
H. Scan Functions
automatically scan to the next higher station, play that station for a few
seconds, then scan to the next higher station. To stop scanning and
continue listening to the current station, press scan button a second time.
Note: the radio remains in scan mode until the scan button is pressed a
second time or one of the tune buttons is pressed.
I. Preset Scan Function
Press the auto button (16) once to enter scan mode. The next higher
preset station will be selected and be played for 3 seconds while the
station, press the auto button (16) a second time. Note: preset scanning
continues unless you press the auto button (16) or either preset button
(P1-P6) to cancel.
J. Local/Distance Function
Press the local button (10) to toggle between local and distant station
K. Changing Tuner Frequency from US to Europe
Europe tuning steps, use the switch on the bottom of the unit. With the
unit disconnected from the power source, use a screwdriver to slide
the switch to the desired position. Note: power must be removed
from the radio, or the reset switch must be pressed before the new
frequency mode is activated.
19.3 CD Player Operation
A. Insert, Play, and Eject a CD
Open the front panel and insert a CD into the slot with the CD label
facing up. The CD will be drawn inside by the motorized mechanism.
Close the front panel. The “DISC IN” symbol on the display indicates
that a CD is in the drive.
To Next Page
Loading...
Need help?
General
