Page 109
J-400
20.11 Optional J-1000 Wireless Remote
A. The Optional J-1000 Remote (Included
System)
Most spa functions can be controlled with the
remote (Figure A). The sleek modern design and
easy navigation make this remote a great addition
to your spa enjoyment. Listed below are the
remote features, how to access and control them.
General features of the remote are:
• The remote does not have a touch screen.
• When you rst use the remote, it needs to be
bonded to the spa.
• When not in used or after any 15 seconds of
inactivity the remote goes into a “Sleep” status
until activated. The backlighting and display
will turn off.
• When activated the remote checks and veries
that it and the control system are bonded.
• When activated the remote checks to see if any of the
components are running. If so, the component icon will
blink on the remote LCD display to alert you that those components
are activated. The water temperature is displayed on top of the
screen, while the main menu is displayed.
• Pressing any key will activate the remote; the backlight will turn on
and illuminate the keys and display. This lighting has a 10 second
time-out period if no keys are pressed.
Note: Remote unit is water resistant not waterproof, therefore the unit
should never be left in the spa while the cover is on and spa is not in use.
Displays for the remote will vary depending on the hot tub model.
= Lock icon: Will only appear if the spa is in locked mode and
needs to be unlocked via the spa not the remote.
= Temperature icon: Allows you to set and control the
temperature.
= Time icon: Allows you to set and control the time, either in a
12-hour or 24-hour period.
= Heating icon: Will only appear if the spa is heating.
1
= Lights 1 icon: Allows you to control the interior lights.
1
= Show 1 icon: Allows you to control the interior Light Rotation
mode.
1
1
USB
AUX
1
2
iPod
3
Figure A
To Next Page
Loading...
Need help?
General
